Labeling Recordings - Sony MZ-R410 Operating Instructions Manual

Labeling recordings

1
Insert a disc and do the following
operations:
To label a track
Start playing or recording a track you
want to label, and label the track
while playing or recording
operations.
To label a group
Turn group mode on (page 23) and
start playing or recording a track
within the group you want to label,
and label the group while playing or
recording operations.
To label a disc
If a disc is already recorded, follow
the procedures from step 2 while the
recorder is stopped. If a disc is new,
start recording and label a disc while
recording.
If you label a disc with group settings,
turn group mode on (page 23).
2
Press MENU.
3
Press > or . repeatedly until
"EDIT" flashes in the display, and
then press ENTER.
4
Press > or . repeatedly until
the following item appears in the
display, and then press ENTER.
When labeling a track
"T: Name"
When labeling a group
"G: Name"
When labeling a disc
"D: Name"
The cursor flashes and the track,
group, or disc is ready to be labeled.
5
Press > or . repeatedly to
select a letter and press ENTER.
The selected letter stops flashing and
the cursor moves to the next input
position.
The buttons used for character input
and their functions are listed below:
Functions
To move the cursor
To switch between
capital letters, small
letters and numbers/
marks
To select a character Press
To enter a letter
To enter a name
To insert a blank
space to type in a
new letter
To delete a letter
and move back all
following letters to
the left
To cancel labeling
6
Repeat step 5 and enter all characters
of the label name.
7
Press ENTER for 2 seconds or more
The track or disc is labeled.
To cancel labeling,
Press CANCEL.
Notes
• When the recording is stopped while labeling
a track, a group, or a disc during recording, or
when the recording moves on to the next track
while labeling a track, the input at that point is
entered automatically.
• "LP:" is automatically added at the beginning
of the track name for tracks recorded in
MDLP mode (page 21).
Operations
Press VOL +, –.
Press X.
> or ..
Press ENTER.
Press ENTER for
2 second or more.
Press VOL + and
END SEARCH at
the same time.
Press VOL – and
END SEARCH at
the same time.
Press CANCEL.
.
35