Recording In Analog (Analog Recording) - Sony MZ-R410 Operating Instructions Manual

Recording in analog
(Analog Recording)
The sound will be input from the
connected equipment as an analog signal,
but recorded digitally to the disc.
To connect to a sound source, an optional
line cable is required. When connecting
the cable, make sure to insert the
connectors firmly.
to LINE OUT jacks, etc
L
(white)
REC
N
Use the connecting cords without an
attenuator. To connect to a portable CD
player having a stereo mini-jack, use a
connecting cord with a stereo-mini
plug on both ends (not supplied).
20
CD player, cassette
recorder, etc.
R (red)
Line cable*
to LINE IN (OPTICAL)
1
Press N while pressing REC.
REC indication lights up in the
display and recording starts.
2
Play the source you want to record.
For other recording operations, see
"Recording an MD right away!
(Synchro-recording)" (page 13).
z
• LINE IN (OPTICAL) jack is for both digital
and analog input.
The recorder automatically recognizes the
type of the cable and switches to digital or
analog input.
• If you press X while pressing REC in step 1
above, the recorder will enter recording
standby mode. To start recording, press X
again.
Note
If you temporarily stop a recording operation
by pressing X, a track mark will be added at
that point when you press X again to resume
recording. The recording continues from a new
track.