Hardware Communication and Control Issues
Frames Fail to Communicate with the PC after a Power
Failure
Module Does Not Seem to Work
Contacting Customer Service
HUC6800+ Installation and Operation Manual
Appendix A: Communication and Control Troubleshooting Tips
•
"Frames Fail to Communicate with the PC after a Power Failure"
on page 63
•
"Module Does Not Seem to Work" on page 63
Have you exited the software and restarted since the frame recovered
from its power failure? To restore communications between the PC and
the frames, ensure that the frames have three or more minutes to recover
from the power failure before you exit the application and restart the
PC.
Although the following troubleshooting tips may seem obvious, please
take the time to ensure the following:
•
All appropriate rear connections are securely made
•
The board is securely installed (with no bent pins)
•
The frame is turned on
We are committed to providing round-the-clock, 24-hour service to our
customers around the world. Visit the Support section of our Web site
at
www.broadcast.harris.com/leitch
the Customer Service team in your geographical region.
for information on how to contact
63