Table of Contents
Advertisement
Chapter 3: Operation
Saving, Selecting, and Recalling Saved Aspect Ratios
Saving a Custom Aspect Ratio
Selecting a Saved Custom Aspect Ratio
Recalling a Saved Custom Aspect Ratio
30
You can save, select, and recall up to five custom aspect ratios in the
HUC6800+ and HUC6800+C modules.
To save a custom aspect ratio, follow these steps:
1. Make sure the ARC H Scale, ARC V Scale, ARC H Offset, and
ARC V Offset parameters have been set.
2. Scroll down to the menu item ARC Preset Save and then select one
of the five aspect ratio preset slots for storage.
3. Wait approximately 2 seconds for the module to process the
command.
To select one of the custom saved aspect ratios for the output image,
follow these steps:
1. Scroll to the ARC Preset Select parameter.
2. Select one of the five saved aspect ratios: Preset1, Preset2,
Preset3, Preset4, or Preset5.
3. Wait approximately 2 seconds for the module to process the
command.
By selecting the ARC Preset Recall parameter, you can also recall any
built-in standard or custom saved aspect ratio settings without changing
the output image.
The ARC Preset Recall parameter will overwrite the following custom
aspect ratio parameters: ARC H Scale, ARC V Scale, ARC H Offset,
and ARC V Offset. If you perform an aspect ratio recall when ARC
Preset Select is set to Custom, the output image aspect ratio will revert
to the recalled aspect ratio.
HUC6800+ Installation and Operation Manual
Advertisement
Table of Contents
