Table of Contents
Advertisement
3.4.3
Site Code
This is a user set, floating point value that is logged in the application event file.
Negative value site codes are caused by the application. As this is the case, it is
recommended that positive values be entered in by the user.
3.5 Log Capacity Tab
The Log Capacity tab (see Figure 6) contains settings for the log period, day period
and event records to save before overwriting the oldest. View the default values in
Figure 6.
Changing any of these values will cause the current database to be deleted and a new
database to be created. Data recorded up to the time of reset will be lost.
3.6 Current Values Tab
The Current Values tab (see Figure 7) shows the current application's primary,
measured and calculated values. These values may not be changed, as they are read-
only.
4.0
CALIBRATION
The following will discuss the Calibration function within PCCU. This function may be
selected by either clicking the toolbar icon within PCCU or moving to Local Connect
and clicking the Calibrate button. Either of these methods will bring up the Calibrate
screen (see Figure 8).
2012981-001 rev. AB
Figure 6 Log Capacity Tab
Figure 7 Current Values Tab
9
Hide quick links:
Advertisement
Table of Contents
