Chapter 5 Maintenance; Cleaning The Cabinet; Cleaning Of Bottle Compartment - Gamko FLEXBAR X/2 Series User Manual

Chapter 5 Maintenance
Proper maintenance of the product will guarantee a long useful life.
Gamko strongly advises to take out a maintenance contract.
DIY maintenance
• Before first use the cabinet should be cleaned using water and a mild
detergent.
• Intensive use requires regular cleaning.
• Regularly clean the condenser using a vacuum cleaner.
• Check and clean the magnetic seals on a regular basis. If the
seal is not airtight it will have a negative effect on the refrigeration
performance.
• Clean the drawer runners monthly, we recommend a light application of bearing grease once a year.
Cleaning of bottle compartment
Is your Flexbar equipped with a bottle compartment? In that case you ought to regularly check on pollution
and excessive condensation. You do so by opening the compartment as a drawer (1). Then subsequently you
remove the cradle container from the drawer as shown on the picture below (2). The container can now easily
be cleaned (i.e. in a dish washer).
The bottle compartment comes standard with a plastic tube. By means of this tube you can easily adapt the
depth of the container to the various height of the bottles.
Attention!
• Do not dismantle any fixed components when cleaning the machine unit!
• Do not use aggressive abrasives or detergents.
• The condenser can have sharp edges, clean with care!
• Clean glass doors with a mild detergent.
• Clean the condenser more frequently if installed in a dusty environment.
• Clean stainless steel with water and Ph neutral detergent, rinse and dry with a soft cloth.
Cleaning the cabinet
39