Chapter 4 Using The Appliance; Prior To Use; Thermostat; Filling The Cabinet - Gamko FLEXBAR X/2 Series User Manual

Chapter 4 Using the appliance
• Clean the cabinet prior to use. For further details we refer to the maintenance section.
• Leave the installation to stand for at least 2 hours before switching on the cabinet.
• Check that the correct fuse is fitted.
Gamko use various types of thermostat in our products. Please consult TECHNICAL MATTERS in Section 6 for
the correct thermostat.For thermostat controls and settings, see the thermostat manual supplied separately.
• This product is only to be used for the refrigeration of beverages.
• Fill the cabinet during a period when it is least used. Repeatedly opening of the door will slow down the
refrigeration of the products.
• Beverages with a high alcohol percentage should always be stored properly sealed in an upright position.
To guarantee optimal performance and air circulation the
air vents of the cabinets should NEVER be obstructed.
NEVER use the cabinet to store electrical appliances!
HINT!
Apply the so called first-in first-out principle when serving beverages out of the cabinet.
This to ensure that the coldest product is served.
38
Prior to use
EMERGENCY STOP
REMOVE THE PLUG FROM THE SOCKET!

Thermostat

Filling the cabinet