How Does It Work; Installing The Product - Gamko FLEXBAR X/2 Series User Manual

Hint! Never install the refrigerator next to a heat source!
A refrigerator works by extracting heat from
the space to be refrigerated and to release
this in the surrounding area. For maximum
air circulation it is recommended to allow at
least 10 cm space around the refrigerator.
Be very careful never to obstruct the
air inlets and outlets.
Place the product on a smooth surface.
1 Slide the feet (1) in the bottom of the product.
2 Make sure the product is standing level using a spirit
level.
3 Tighten the feet (1) by inserting the 6 mm Allen
key in the holes provided (2), until the product is level.
4 For a closed segment tighten the bolts under the
cabinet (3) holding the feet (1) with a
spanner.
5 Cover the holes at the inside of the
cabinet (2) with the supplied plugs (4).
Installing the product (X/S* only)
Place the product (x/s * only) on a smooth surface.
Make sure the product is standing level using a spirit level.
Turn the hexagonal bolts on all feet at the bottom side of the
product with a wrench until the product is level.
How does it work
Installing the product
A
33
DETAIL A