Valeo ClimFill Maxi Use And Maintenance Manual page 9

HOSE CONNECTIONS: Hoses may contain pressurised refrigerant. Before changing the
service couplers, check the respective pressures in the hoses (pressure gauge).
Before connection to a car A/C system, to an external tank/vessel, check that the
quick couplers are closed (unscrewed HP and LP valves).
Scrupulously follow the instructions on the equipment's display.
QUICK COUPLERS CLOSING/OPENING:
MAINTENANCE/GENERAL CLEANING: The equipment has to be serviced at the intervals
indicated by the equipment itself. These controls include also a leak self-test that the
equipment performs automatically.
The service station maintenance has to be performed according to the procedures
described in this manual and to the current safety regulations.
Use only VALEO SERVICE original parts.
When the equipment requires the dryer filter and the vacuum pump oil to be changed,
you have to be careful in the replacement.
A/C service station maintenance can be carried out exclusively by a trained operator
or by a service man of a VALEO SERVICE certified seller. If the maintenance is not
performed according to the expected schedule, the equipment will be blocked.
Do not use chemical agents for the service station cleaning, as they could attack the
material or the surface.
ENGLISH
Opening (connect to the
vehicle):
clockwise
Closing (detach from the
vehicle):
counter clockwise
9 / 74 CAP. 3 - SAFETY CONDITIONS
ClimFill Maxi