Valeo ClimFill Maxi Use And Maintenance Manual page 10

ClimFill Maxi
STOP FOR LONG PERIOD: Store the equipment in a safe place, disconnected from the
mains, away from excessive temperatures, humidity and the risk of damaging impact.
Contact the Technical Service to run a safety shutdown of the equipment, and if
scrapping the unit, to drain and recycle the R134a gas as required by local legislation.
To resume operation, repeat the installation (there is no need to register the unit anew
on the website) and run the commissioning trials and regular operational checks as
required by local legislation.
TRANSPORT: If the equipment has to be transported, you have to screw the safety screw
in order to fix the equipment scale. The safety device for transport is on the back of the
equipment and it consists of a bolt with wing-nut. Commissioning: Slacken the wing-nut,
unscrew the screw for about 4 mm. and fix it again with the wing-nut. Transport: slacken
the wing-nut, screw the screw by hand and then fix it again with the wing-nut. For the
transport of the R134a refrigerant, specific regulations are in force in every country.
Therefore, refer to your reseller or your authorised service centre for information.
CAP. 3 - SAFETY CONDITIONS 10 / 74 ENGLISH