Valeo ClimFill Maxi Use And Maintenance Manual page 68

ClimFill Maxi
CODE MESSAGE
A033 CIRCUIT LEAKAGE
A034 VACUUM LEVEL
TOO LOW
A035 VESSEL EMPTY
A036 VESSEL
REFRIGERANT
QUANTITY TOO
LOW
CAP. 16 - MESSAGE AND ALARM CODES
When it can Possible
occur causes
During Leakage in the
vacuum, circuit or in the
vessel filling vehicle fittings.
or leak test
phase, both
under
pressure
and in
vacuum
During Vehicle A/C
detection system is
dye pressurised
injection notwithstandin
and oil g the vacuum
injection phase,
phase. The possible
necessary presence of
vacuum leakages
level is not inside A/C
been system.
reached. Vacuum
phase time not
sufficient or
phase not
executed
(manual
cycle).
During the Refrigerant gas
gas injection is too low for
and flushing the procedure
phase to be
completed
During the Gas amount in
gas injection internal tank
and flushing less than
phase required
Identify the leak position
in the vehicle or
connected system and
have it repaired by
trained and qualified
staff according to local
legislation.
Repeat cycle, increase
vacuum time, if
leakages has been
identified, identify the
leak position in the
vehicle or connected
system and have it
repaired by trained and
qualified staff according
to local legislation.
Fill the internal tank
Fill the internal tank
68 / 74
Actions
ENGLISH