Valeo ClimFill Maxi Use And Maintenance Manual page 61

•
the bodies in charge, after the results of the previous checks performed (of
commissioning or period requalification) do not establish different frequencies.
The checks must be performed by the bodies in charge in the country where ClimFill
is commissioned, in compliance with the national laws/rules and the respective
procedures. Please identify and contact these bodies in order to establish performance
times and modes of commissioning and periodic requalification checks (integrity,
functioning, or any other scheduled checks).
Depending on local legislation, the checks may be extended to other components to
verify the metrological characteristics of the integrated instrumentation and the presence
of essential equipment and accessories.
Here below, some possible checks on components subject to the PED directive are
outlined.
40l RECEIVER
Category II (Dir. 97/23/EC)
•
Make sure no corrosion or leakage is present; under normal conditions of use, the
vessel life is at least 20 years (in the absence of wear and other types of damage).
SAFETY VALVE D7/S 20bar R 1/4 NPT
Category IV (Dir. 97/23/EC)
•
If the automatic safety valve trips, contact technical service to have the unit
checked over, resolve any problems and replace the valve if necessary.
ENGLISH 61 / 74
ClimFill Maxi
CAP. 13 - MAINTENANCE
® Maxi