Installation - Midland M Zero Instruction Manual

INSTALLATION

Nuts
Nuts
Washers
Screws
Screws
Washers
Bracket
Washers
Screws and
washers
Screws
Washers
Safety and convenience are the primary consideration for mounting
any piece of mobile equipment. All controls must be readily available to
the operator without interfering with the safe operation of the vehicle.
Be sure all cables are clear of the brake, clutch and accelerator. Also,
thought must be given to the convenience and comfort of passengers.
Another extremely important requirement is the ease of installation and
removal for those occasions when you might want to remove the unit
for service and maintenance.
The most common mounting position for a transceiver is under the
dashboard directly over the drive shaft hump. Do not mount the
transceiver in the path of the heater or air conditioning stream. Take
your time and plan your installation carefully. When the best location
for mounting , use the mounting bracket as a template
to mark mounting holes. Take care that you do not drill into wiring,
trim or other accessories.
M Zero Instruction Guide | 5