Replacing Fuse; Connecting The Microphone - Midland M Zero Instruction Manual

Mount in position with bolts, lock washers and nuts or self-
threading screws. transceiver in any location
where 12 6V ± 10% power is available. Insert the power cable with
lighter plug into the vehicle's cigarette lighter cord.
antenna system . The lead from
the antenna should be connected to the antenna connector. If
using an external speaker, connect it to the EXT-SPKR jack.

REPLACING FUSE

If replac the DC Power Cord , use 2A type. Hold the
fuse holder and press on the inside, then rotate the holder.

CONNECTING THE MICROPHONE

Your transceiver has a microphone connector. This ensures that
you won't accidentally pull out or loosen the plug connection when
the microphone.
6 | M Zero Instruction Guide