Table of Contents
Advertisement
How to install your
Midland mobile CB.
This transceiver may be installed in
any
12-volt negative or positive ground-
system
car or truck. Most current U.S.
and foreign vehicles use a negative
system, but some older models and
some newer large trucks may have a
positive ground.
Check the requirements for your
vehicle before you begin installation.
Generally, you have a
negative-ground
system if the minus ( —) battery terminal
is connected to the motor block. Contact
your dealer in the event you are unable to
determine your vehicle's polarity system.
Installation and operating
accessories furnished with
your Midland Mobile CB:
1
. Easy-removal mounting bracket
system.
2
. Microphone bracket system.
3. All main-unit and microphone
mounting hardware needed for
normal installation.
4. Plug-in microphone with coil cord.
5. Owner's Manual.
Where to locate your CB
transceiver.
Your new Midland CB is designed
to be installed under the dash of
your vehicle.
^ Safety and convenience are the
primary considerations in deciding
exactly where to locate your radio.
Caution:
Be sure that the unit is locatec
so that it does not interfere with the
driver or impair access to any controls.
Connecting cables must be routed and
secured in such a manner as not to
interfere with the operation of the
brake, accelerator or other controls.
Interference from either the unit or
connecting cables may contribute to
the loss of control of the vehicle.
Also be sure the CB installation
does not interfere with airbag
operation.
7
Advertisement
Table of Contents
