Operating
Remote control
Reset
LED Ball RGBW 50cm 4x8W DMX
34
LED ball
Press [MENU] and then [UP] or [DOWN] until the menu item 'Settings' is displayed and press
[ENTER].
Press [UP] or [DOWN] until 'IR Remote' is displayed and press [ENTER]. Use [UP] or [DOWN] to
select one of the following options:
Display
' On'
'Off'
Confirm the desired selection with [ENTER].
Press [MENU] and then [UP] or [DOWN] until the menu item 'Settings' is displayed and press
[ENTER].
Press [UP] or [DOWN] until 'Factory Reset' is displayed and press [ENTER]. The display shows
'Reset Now' . Confirm with [ENTER]. The device is reset to factory default settings.
Meaning
Control of the device via remote control is activated.
Control of the device via remote control is deactivated.