Jacking And Lifting - Tesla 3 Owner's Manual

Hide thumbs Also See for 3:
Table of Contents

Advertisement

Jacking and Lifting

Jacking Procedure
Follow the steps below to lift Model 3. Ensure
that any non-Tesla repair facility is aware of
these lifting points.
1.
Position Model 3 centrally between the lift
posts.
2.
Position the lift arm pads under the
designated body lift points at the
locations shown.
Warning: DO NOT position the lift
arm pads under the Battery or side
rails, as shown in red.
3.
Adjust the height and position of the lift
arm pads to ensure that they are correctly
located.
4.
With assistance, raise the lift to the
desired height, ensuring the lift arm pads
remain in their correct positions.
5.
Engage any lift safety locks. Follow the lift
manufacturer's instructions.
Warning: Never raise Model 3 when the
charge cable is connected, even if
charging is not in progress.
Warning: Do not work on an incorrectly
supported vehicle. Doing so can cause
serious damage, bodily injury, or death.
Caution: DO NOT lift from under the
Battery. Place the lift arm pads under the
designated body lift points only. The
locations shown are the only approved
lifting points for Model 3. Lifting at any
other points can cause damage. Damage
caused by incorrectly lifting Model 3 is
not covered by the warranty.
162
Model 3 Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents