Homelink Universal Transceiver - Tesla 3 Owner's Manual

HomeLink
About HomeLink
If your vehicle is equipped with the HomeLink
Universal Transceiver, you can operate up to
three Radio Frequency (RF) devices, including
garage doors, gates, lights, and security
systems.
Note: Depending on date of manufacture,
market region, and options selected at time of
purchase, some vehicles are not equipped
with a HomeLink Universal Transceiver.
Warning: Do not use the HomeLink
Universal Transceiver with a device that
does not have safety stop and reverse
features. Using a device without these
safety features increases the risk of injury
or death.
Programming HomeLink
To program HomeLink
1. Park Model 3 so that the front bumper is
in front of the garage door, gate, or light
you want to program.
Caution: Your device might open or
close during programming. Before
programming, make sure that the
device is clear of any people or
objects.
2. Get the device's remote control and
ensure it has a healthy battery. Tesla
recommends replacing the battery in the
device's remote control before
Programming HomeLink.
3. Touch the HomeLink icon on the top of
the touchscreen.
4. Touch Create HomeLink, then use the
keyboard on your touchscreen to enter a
name for your HomeLink device.
5. Touch Enter on the keyboard or touch
Create HomeLink.
6. Touch Start then follow the onscreen
instructions.
Note: If you see a screen called "Train the
receiver" while programming the device,
remember that this is a time-sensitive
step. After pressing the Learn/Program/
Smart button on the device's remote, you
only have approximately 30 seconds to
return to your vehicle, press Continue, and
then press the trained HomeLink device
name twice. Consider having an assistant
help with this step.
7. Once your device is programmed, touch
Save to complete the HomeLink
programming routine.
134
®
Universal Transceiver
®
®
(if equipped):
8. Ensure HomeLink works as expected. In
some cases the programming process
®
may require multiple attempts before
succeeding.
Once programmed, you can operate the
device by touching its corresponding
HomeLink icon on the touchscreen's status
bar. HomeLink remembers the location of your
programmed devices. When you approach a
known location, the HomeLink control on the
touchscreen automatically drops down. When
you drive away, it disappears.
Note: For additional assistance or
compatibility questions, contact HomeLink
(www.homelink.com or call 1-800-355-3515).
Auto Opening and Closing
To operate a HomeLink device without
touching the touchscreen, you can automate
the device to open as you approach and close
as you drive away:
1. Touch the HomeLink icon on the top of
the touchscreen and choose the device
you want to automate.
2. Select the Auto-open when arriving
checkbox if you want the device to open
as you approach.
3. Touch the arrows to specify the distance
you want your vehicle to be from the
device before it opens.
4. Select the Auto-close when leaving
checkbox if you want the device to close
as you drive away.
As you approach (or drive away from) a
device that is set to operate automatically, the
HomeLink status icon displays a count-down
message to let you know when the device will
automatically open/close. In situations where
you don't want the device to automatically
open or close, touch Skip Auto-Open or Skip
Auto-Close at any time during the count-down
message.
Model 3 Owner's Manual