Tesla 3 Owner's Manual page 27

Front and Rear Seats
Removing/Installing the Rear Center Head
Support
To remove the head support:
1. Raise the head support as described
above.
2. Press and hold the button on the outer
base of the right post.
3. Insert a short, flat object (such as a small
flat-head screwdriver) into the opening on
the inside base of the left post and pull
the head support upward.
To re-install the head support:
1. With the front of the head support facing
forward, insert both posts into the
corresponding holes on the seat back.
2. Press down on the head support until it
clicks into place.
3. Pull up on the head support to ensure that
it is secure.
Warning: Ensure that the head
support is correctly installed before
seating an occupant in the rear center
seat. Failure to do so increases the
risk of injury or death if a collision
occurs.
26
Seat Heaters
The front and rear seats (if equipped) contain
heating pads that operate at three levels from
3 (highest) to 1 (lowest). To operate the seat
heaters, see Climate Controls
Warning: To avoid burns resulting from
prolonged use, individuals who have
peripheral neuropathy, or whose capacity
to feel pain is limited because of diabetes,
age, neurological injury, or some other
condition, should exercise caution when
using the climate control system and seat
heaters.
Seat Covers
Warning: Do not use seat covers in Model
3. Doing so could restrict deployment of
the seat-mounted side air bags if a
collision occurs.
on page 115.
Model 3 Owner's Manual