Tesla 3 Owner's Manual page 19

Front Trunk
Press the interior release button to open the
front trunk, then push up on the hood.
Note: The interior release button glows
following a brief exposure to ambient light.
Warning: People should never climb
inside the front trunk. Never shut the
front trunk when a person is inside.
Warning: Care should be taken to ensure
that objects inside the front trunk do not
bump against the release button, causing
the trunk to accidentally open.
Opening with No Power
In the unlikely event that Model 3 has no 12V
power, you will be unable to open the front
trunk using the touchscreen or mobile app. To
open the front trunk in this situation:
Note: The following will not open the front
trunk if Model 3 is locked and has 12V power.
1. Locate an external 12V power supply
(such as a portable jump starter).
2. Release the tow eye cover by pressing
firmly on the top right perimeter of the
cover until it pivots inward, then gently
pulling the raised section toward you.
Note: The tow eye cover is connected to
the vehicle's black negative (-) terminal.
18
3. Pull the two wires out of the tow eye
opening to expose both terminals.
4. Connect the 12V power supply's red
positive (+) cable to the red positive (+)
terminal.
5. Connect the 12V power supply's black
negative (-) cable to the black negative (-)
terminal.
Note: Applying external 12V power to
these terminals only releases the hood
latches. You cannot charge the 12V
battery using these terminals.
6. Turn on the external power supply (refer
to the manufacturer's instructions). The
hood latches are immediately released
and you can now open the hood to access
the front trunk area.
7. Disconnect both cables, beginning with
the black negative (-) cable.
Model 3 Owner's Manual