Page 1
* Enterprise SSDs tested by Drobo as compatible for use in B1200i. More information @ http://support.drobo.com/app/answers/detail/a_id/655. Preparing to Add SSDs If you initially deployed a Drobo B1200i without SSDs, some preparations are required in order to install SSDs and enable Automated Data-Aware Tiering and performance acceleration. STEP 1...
Page 2
The latest Drobo Dashboard software for the B1200i is posted @ http://www.drobo.com/support/updates.php. Download the version of Drobo Dashboard posted and install. STEP 3 If the B1200i is running firmware version 1.1.0 or higher, skip to Step 5. STEP 4 The latest firmware for the B1200i is posted @ http://www.drobo.com/support/updates.php.
Page 3
Add SSDs to a Drobo B1200i to Enable Automated Data-Aware Tiering STEP 6 If you purchased the B1200i 24TB configuration with 12 x 2TB SAS drives, you must remove 3 drives to make room for the SSDs that will make up the transactional tier.
Page 4
After you add SSDs to the B1200i, you don’t need to do anything further to configure the storage. Automated Data- Aware Tiering manages the hot and cold blocks of data, instantly boosting performance for all of the volumes in the Drobo.
Page 5
1.866.97.DROBO Copyright 2012 Drobo, Inc. Data Robotics, Drobo, DroboEllite, DroboPro, BeyondRAID, and Smart Volumes are trademarks of Drobo, Inc., which may be registered in some jurisdictions. All other trademarks used are owned by their respective owners. All rights reserved. Specifications subject to change without notice.
Need help?
Do you have a question about the B1200i and is the answer not in the manual?
Questions and answers