※Syncing log requires stable internet signal.
2.9. Firmware Update
ATMOS regularly release new Firmware
including new feature, bug fix and improvement.
Keep the Firmware of your MISSION ONE the
latest.
※Updating Firmware requires stable internet
signal.
1. Via USB cable (suggested):
a. Get Firmware Tool from
https://www.atmos.app/support/
(Win10/Mac)
b. Install, then run Firmware tool.
c. Connect MISSION ONE with the charging
cable.
d. Press U pdate Firmware button.
2. Via ATMOS App(OTA):
a. Select your device in the ATMOS APP.
b. Press U pgrade button if there's a new
version.
※Due to the signal of bluetooth may be
interfered by other devices nearby. Please use
the PC/Mac tool to update the firmware via USB
cable if there is abnormal behavior on MISSION
ONE after App update.
3. Watch Mode
3.1. No Fly Time and Surface Intervel
Due to residual nitrogen in body after diving. Please wait
until the No Fly Time disappears then take flight.
※Upper-right: Surface Intervel
moment exit water in last dive.
※Upper-left: No Fly
from the moment exit water in last dive.
6
(S.I.)
starts from the
Time
Icon. Counting down by 24hr