● Do not throw, collide, press the MISSION ONE.
Do not expose MISSION ONE under the sunlight
or left it in a car under sunlight.
2.5. APP Pairing
Use ATMOS App to sync dive log, update
firmware.
1. Download the ATMOS App:
2. After logging, go to"Your device", select "Start
Pairing".
※Enable bluetooth of the mobile phone, Android
may need to authorize the connection of the
device.
3. MISSION ONE : SETTING -> CONNECT ->
CONNECT APP : ON
4. ATMOS App : Select the device with the correct
bluetooth number. (Bluetooth number"xxxx"= the
4 numbers of the serial number of your MISSION
ONE)
h ttp://l.ead.me/atmos
5
5. ATMOS App : : Enter the 6 Pin Codes shown on
MISSION ONE. Connected!
2.6. Unpair
1. MISSION ONE SETTING ->CONNECT
->UNPAIR: YES
2. ATMOS App: S elect your device, press
upper-right button: Delete.
3. Your mobile phone: Bluetooth > delete the device
2.7. Smart Notification (iOS)
Smart Notification allows MISSION ONE to show
the message and phone call from the paired
mobile phone.
Eanble Smart Notification:
● MISSION ONE: SETTING -> CONNECT ->
CONNECT APP : ON
● NOTIFICATION: ALL / CALL ONLY / OFF
2.8. Sync Log
Sync the dive logs from MISSION ONE to
ATMOS App.
● ATMOS App: Press the sync button on the right
side in the page of Your Device.