Freedive Mode; Display Layout And Alerts - Atmos MissionOne User Manual

Advanced Setting:
Conservatism (See 4.4 conservatism)
Air/Nitrox (See 4.2 Nitrox)
Dive Planner (See4.3 Dive Planner)
Water Type Salt or freshwater. This setting
affects depth readings because salt
water is more dense.
Start Depth The depth for beginning a dive.
End Dive Delay The amount of time after crossing
the end depth before a dive ends.
Time Alarm Alert user when reach this dive time.
Depth Alarm Alert user when reach this depth.
Dive site (See 7.2 Dive Site)

5. Freedive Mode

!!!​
D ue to the residual nitrogen inbody after
scuba/Gauge diving. It's recommended to have at least
12 hours S.I. before doing freediving.

5.1. Display Layout and Alerts

Predive
During dive
12
Press Button A (Upper-Right)
to view Time Alarm settings.
Press Button C (Bottom-Right)
to view Depth Alarm settings.
※​ P ress Button B (Right)to
access Advanced setting
※Hold ​ B utton C
(Bottom-Right) to access
stopwatch
Upper-left:​ Dive count
​
Mid-left: M ax depth
Bottom-left:​ Water temp
Upper-right​ : Dive time
Right​ : Current Depth
Bottom-right​ : Speed m(ft)/sec
※Press Button D
(Bottom-Left): Turning
backlight On/Off.
※Hold Button D (Bottom-left):
Change backlight brightness.