Cleaning And Maintanance - Russell Hobbs RHMPF4 Instructions & Warranty

Oscillation
Press the clutch knob down to activate the oscillating function. The fan head will swing
from side to side whilst blowing air.
To stop oscillation, allow the fan head to move into the desired position and then pull
the clutch knob up.

CLEANING AND MAINTANANCE

1. Turn off and unplug the unit prior to cleaning.
2. To clean the blade and grille assembly, first remove the front grille / cowl
assembly by unscrewing the small screws around the edge of the rear safety
grille.
3. Never spray with liquids or submerge the fan in water or any other liquid.
4. Do not use flammable liquids, chemicals, abrasive creams, steel wool or
scouring pads for cleaning.
5. Clean the motor housing and body assembly with a clean, damp cloth and wipe
dry.
6. Refit the front grille/cowl assembly and ensure all the screws and washers are
inserted and tightened properly
11