Advertisement
PARTS DIAGRAM
OPERATING INSTRUCTIONS
•
Ensure that the voltage used corresponds with the voltage indicated.
•
Pressing the "SWING" button will turn the oscillating function ON or OFF
•
To select the fan speed or wind strength, select the required speed control switch:
SWING - SWING
0 - Off
1- Low speed
2 - Medium speed
3 - High speed
Note: The fan is tilt adjustable. To adjust the tilt angle of the fan, loosen the tilt adjust screws on
the sides of the fan. Tilt the main body to your required angle and tighten the screws again.
CLEANING AND MAINTAINANCE
1. Always switch the fan off, and unplug it before cleaning.
2. Clean the parts using a damp cloth and a mild detergent. Always ensure that all
detergent residues are removed.
3. Never use abrasive cleaning agents or solvents.
4. Do not immerse in any form of liquid.
1.Main body
2.Tilt adjust screws (one on each side)
3. Stand
4
Advertisement
