Operation With Software-Decoder - VCS VideoJet 10 Manual

Operation
"
"
"
"
Terminate
connection
"

Operation with Software-Decoder

106
Activate the alarm input,
or
start the terminal program (see page 26); enter the command I
to switch to the IP menu.
In the IP menu enter the command r to change the remote IP
address and enter the IP address of the device that is to be con-
nected.
In the IP menu enter the command a to activate the automatic con-
nection set up.
Termination of the connection is only possible with the aid of the ter-
minal program.
In the IP menu enter the command a to deactivate the automatic
connection set up.
The video server VideoJet 10 in association with the program
VIDOS comprises a powerful systems solution.
VIDOS is a program for the operation, control and administration of
CCTV installations (e.g. surveillance systems) at remote locations.
It runs under the Windows operating system. It primarily provides
decoding of video, audio and control data received from a remote
transmitter.
During operation of a VideoJet 10 with VIDOS, a multiplicity of
operating and configuration options are offered. For details, see the
documentation provided with the software.
VideoJet 10