Rear Panel Connectors - VCS VideoJet 10 Manual

Product Description

Rear panel connectors

18
1 BNC socket Video In (transmitter) or Video Out (receiver)
for video source or for an analog video monitor
2 Slide switch 75 Ω (transmitter)
for termination of the video input
3 Bidirectional audio interface Audio I/O
3.5 mm stereo jack for connection of a loudspeaker or an audio
source (mono line)
4 Serial interface port COM2: RS232
9-pin sub-D socket (m) for control data transmissions (protocol
RS232)
5 Serial interface port COM1: RS232/485
9-pin sub-D socket (m) for control data transmissions
(protocols RS232, RS422 and RS485) and for configuration
using terminal software
6 LED Power
flashes yellow when ready
Note
You can find further information on the LEDs on page 111.
VideoJet 10