Storing Snapshots - VCS VideoJet 10 Manual

Storing snapshots

"
Image resolution
"
"
"
"
VideoJet 10
It is possible to store individual images from the current video
sequence in the Livepage in JPEG format on the computer hard
drive.
Click on the symbol Snapshot. The image will be stored. The stor-
age location is specified during configuration of the unit (see
page 71).
Individual images can be displayed at different resolutions when the
snapshot is taken entering a command into the Internet address
field. To do so just append the corresponding parameter to the com-
mand snap.jpg:
snap.jpg?JpegSize=XS
snap.jpg?JpegSize=S
snap.jpg?JpegSize=M
snap.jpg?JpegSize=XL
Without this additional parameter, the image size will be 352 × 288
pixels.
In the field for the Internet address (URL), enter the IP address of
the VideoJet 10, followed by the command /snap.jpg
(for example: http://192.168.0.12/snap.jpg).
Press the return key on the computer. A single frame image will be
displayed in a new window.
Using the mouse onscreen, press the right mouse button and select
the command Save image as... .
Store the single image in the required format under a new name.
128 × 96 pixels
176 × 144 pixels
352 × 288 pixels
704 × 576 pixels
Operation
99