Download Print this page
Honeywell V4044C Product Data

Honeywell V4044C Product Data

Motorized zone valves, 3-port hydronic valves

Advertisement

Quick Links

Design
V4044C and V4044F zone valves consist of:
• 3-way valve housing with BSPP internal threads
• Control ball assembly
• Actuator assembly with cable
• V4044F1000 with SPDT end switch
• V4044F1034 with SPST end switch
Materials
• Valve housing made of forged brass
• Spindle shaft made of brass
• O-ring seals made of EPDM rubber
• Ball plug made of NBR rubber
• Actuator cover and base made of zinc-plated steel
Honeywell • All rights reserved
V4044C, V4044F
Motorized Zone Valves
3-PORT HYDRONIC VALVES
Application
Honeywell V4044C and F 3-port hydronic valves are used in
domestic and small commercial heating and cooling
applications to control the flow of hot or cold water.
They are designed for on-off zone control of domestic sys-
tems and can be used to control individual fan coil, radiator,
space heater or convector applications. They can be con-
trolled by a line voltage SPST controller such as a room
thermostat, aquastat or flow switch.
The actuator head is removable without affecting the integrity
of the water system.
Features
• Rugged design
• Control by a line voltage SPST controller
• Actuator head installation does not require draining of
the system
• High flow rate capacity
• Indifferent to dirt in system

Specifications

Medium
pH-value
Operating temperature
Ambient temperature
Operating pressure
Differential pressure
k
(cv)-values
vs
Flow
Starting position
Voltage
Power consumption
Auxiliary switch rating
Nominal timing
Electrical termination
Shipping temperature
Humidity rating
Atmosphere
PRODUCT DATA
Water or water-glycol mixture
(max. 50% glycol content),
quality to VDI 2035
8...9.5
5...88°C (41...190°F)
max. 50°C (122°F)
max. 8.6 bar (125 psi) static
see chapter "Dimensions" below
see chapter "Dimensions" below
AB →A or B
port A normally closed
220-240V, 50Hz
6W / 0.042A
2.2A at 230Vac, 50Hz
On: 30 seconds under power
Off: 12 seconds under spring
return
1m flying lead, heat resistant
cable
-40...65°C (-40...149°F)
5...95% RH (non-condensing)
non-corrosive, non-explosive
EN0H-0325GE25 R0906

Advertisement

loading

Summary of Contents for Honeywell V4044C

  • Page 1: Specifications

    3-PORT HYDRONIC VALVES PRODUCT DATA Application Honeywell V4044C and F 3-port hydronic valves are used in domestic and small commercial heating and cooling applications to control the flow of hot or cold water. They are designed for on-off zone control of domestic sys- tems and can be used to control individual fan coil, radiator, space heater or convector applications.
  • Page 2 NOTE: The V4044C has no end switch. It is equipped with a 3 wire cable (line, neutral, earth) The V4044F1034 has an SPST end switch. It is equipped with a 5-wire cable (line, neutral, earth, end switch). The end switch closes when the valve is in position AB –...
  • Page 3 V4044C, V4044F Dimensions Fig. 6. V4044C, V4044F 3-way zone valve Table 2. Main dimensions and other values Body -value max. close- Dimensions off pressure 1/2” BSPP (internal) 1.4 bar 1/2” 3/4” BSPP (internal) 0.7 bar 3/4” 1” BSPP (internal) 0.55 bar 1”...
  • Page 4 Phone: +49 (6261) 810 Subject to change • All rights reserved Fax: +49 (6261) 81393 Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, www.honeywell.com Route du Bois 37, Switzerland or by its Authorized Representative.

This manual is also suitable for:

V4044f