Consumer States The Water That Is Sprayed Out Is Not Hot - Bissell ProHeat 2X Select BS-9400F Troubleshooting Manual

Consumer reports the water that is sprayed out is not hot.
Solution 1:
Yes, is the power switch and red heater switch on the unit
switched to ON (l) position?
Yes
** NOTE: The heater will increase the water temperature by
25°f. You should start with hot tap water in the bladder.
Empty the Tank-in-Tank assembly with hot tap water (Not
boiling or water heated in the microwave).
Allow heater to warm up for about 2 minutes. Is the water
spraying out hot now?
Yes, problem solved
Prepared by Monique Lania
Is the machine switched on at the power outlet in the wall?
No, switch the power switch and red heater switch to ON (l) position, problem solved
No, refer customer to an Authorized Service Centre
No, switch the power on, problem solved
17
Call Servicing Guide ProHeat 2X 9400F.doc