Warning Labels And Safety Instructions - Standex Master-Bilt B-SERIES Installation & Operation Manual

WARNING LABELS AND SAFETY INSTRUCTIONS

This is the safety-alert symbol. When you see this symbol, be alert to the potential for
personal injury or damage to your equipment.
Be sure you understand all safety messages and always follow recommended precautions
and safe operating practices.
NOTICE TO EMPLOYERS
You must make sure that everyone who installs, uses or services your refrigeration is
thoroughly familiar with all safety information and procedures.
Important safety information is presented in this section and throughout the manual. The following
signal words are used in the warnings and safety messages.
DANGER:
Severe injury or death WILL occur if you ignore the message.
WARNING:
Severe injury or death CAN occur if you ignore the message.
CAUTION:
Minor injury or damage to your refrigeration can occur if you ignore the message.
NOTICE:
This is important installation, operation or service information. If you ignore the
message, you may damage your refrigeration.
The warning and safety labels shown throughout this manual are placed on your Master-Bilt
refrigeration at the factory. Follow all warning label instructions. If any warning or safety labels
become lost or damaged, call our parts and technical service department at 800-684-8988 for
replacements.
5/16 Rev. B 57-02497
This label is located on the condensing unit.
4
®