Introduction - Standex Master-Bilt B-SERIES Installation & Operation Manual

INTRODUCTION

Thank you for purchasing Master-Bilt
instructions for installation, use and service. Read all of this manual carefully before installing or
servicing your Master-Bilt
NOTICE
Installation and service of the refrigeration and electrical components must be
performed by a refrigeration mechanic or licensed electrician.
The portions of this manual covering refrigeration and electrical components contain technical instructions intended only for
persons qualified to perform refrigeration and electrical work.
DANGER
Equipment MUST be properly grounded.
Improper or faulty hook-up of electrical components of the refrigeration units can result in severe
injury or death.
All electrical wiring hook-ups must be done in accordance with all applicable local, regional or
national standards.
NOTICE Read this manual before installing your refrigeration. Keep the manual and refer
to it before doing any service. Failure to do so could result in personal injury or equipment
damage.
This manual cannot cover every installation, use or service situation. If you need additional information,
contact us at:
5/16 Rev. B 57-02497
®
refrigeration equipment. This manual contains important
®
refrigeration equipment.
Parts and Technical Service Department
Master-Bilt Products
908 highway 15 North
New Albany, MS 38652
Phone: 800-684-8988
Fax: 866-882-7629
E-Mail: service@master-bilt.com
3