Instructions For Shortening The Boom Rail - Schartec Move 600 Installation And Operating Instructions Manual

Figure 1
Step 1: Remove the rail end. (Figure 1)
Step 2: Remove the rail head. (Chain - Figure 2, Belt - Figure 3)
Step 3: Cut the rail from the head side to the desired length. (Chain - Figure 4, Belt - Figure 5)
Remark: Cut L1 to a max. so that L is min. 2000mm (L1 = The cut length of rail, L = The whole length of rail)
Figure 6
Figure 7
Figure 8
Step 5: Cut the Chain or Belt. (Chain - Figure 8, Belt - Figure 9)
Remark: L2 = L1 x 2 (L2 = The cut length of Chain or Belt, L1 = The cut length of rail)

Instructions for shortening the Boom Rail

Figure 4
Figure 2
Step 4: Release the Chain or Belt
from the trolley latch.
Release from
(Chain - Figure 6, Belt - Figure 7)
here ONLY
Remark: Only release the Chain or
Belt from the side which is exactly like
Figure 6 & Figure 7.
Release from
here ONLY
Figure 9
Figure 10
49
Figure 3
Figure 5
Step 6: Reassemble the rail.