Cisco Aironet 1520 Series Hardware Installation Manual page 47

Chapter 2 Mounting Instructions
Figure 2-16
1
Cable strand bracket
Step 2 Attach the strand bracket to the access point using two M8 x16 bolts (with flat and lock washers) on each
side of the access point (see
Note
OL-12632-02
Clamp Bracket with Cable Clamps
Figure
When attached to the cable strand, the access point must be vertically adjusted before the final
tightening of the bolts.
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
2
Two cable clamps, flat washer, and M8 flange nut.
2-17). Only hand-tighten the bolts.
Mounting the Access Point
2-31