Cisco Aironet 1520 Series Hardware Installation Manual page 35

Chapter 2 Mounting Instructions
Step 3 Screw a M8 x16 bolt in the top support bolt hole on each side the access point (see
screw the bolt all the way in; leave approximately a 0.25 in. (0.635 cm) space.
Figure 2-7
1 Ground lug location
2
M8 x16 bolt
(supplied with pole mount kit)
OL-12632-02
Location of Access Point Top Support Bolt Hole
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
3 Second bolt hole location
Mounting the Access Point
Figure 2-7). Do not
2-19