Jumil JM 2880 PD Pantographic Instruction Manual
  1. Manuals
  2. Brands
  3. Jumil Manuals
  4. Farm Equipment
  5. JM 2880 PD Pantographic
  6. Instruction manual
Jumil JM 2880 PD Pantographic Instruction Manual

Jumil JM 2880 PD Pantographic Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner: .................................................................................... .
............................................................................................... .
Address: ................................................................................. .
............................................................................. No. ........... .
Phone ...................................................................
City ....................................................................... State ........ .
Zip Code ................. - ...........
Machine Model ........................................................................ .
Serial Number ......................................................................... .
Year of Manufacture ................................................................ .
Invoice No ............................................................................... .
Date ............. / ........... / ................ .
Authorized Distributor
JM 2880 PD Pantographic Instructions Manual
IDENTIFICATION
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JM 2880 PD Pantographic and is the answer not in the manual?

Questions and answers

Related Manuals for Jumil JM 2880 PD Pantographic

Summary of Contents for Jumil JM 2880 PD Pantographic

  • Page 1 JM 2880 PD Pantographic Instructions Manual IDENTIFICATION Owner: ..................................... Address: ................................No.... . Phone ..............City ............... State ..Zip Code ....- ... Machine Model ................ . Serial Number ................Year of Manufacture ..............
  • Page 2 JUMIL's obligation to extend said improvements / modifications to previously sold products or models. 2.8. JUMIL will not be held liable to pay indemnities of any kind due to harvest losses resulting from the inadequate setting of devices comprising...
  • Page 3 Keep this manual in a secure location for easy consultation. JUMIL and its dealer network will always be ready to provide you with the required technical clarifications and instructions needed for your implement.

  • Page 4: Table Of Contents

    JM 2880 PD Pantographic Instructions Manual TABLE OF CONTENTS - PRODUCT PRESENTATION ................6 - SAFETY NORMS ....................7 - TECHNICAL SPECIFICATIONS ................ 9 - WORK POWER ....................11 - OPTIONAL 8 - 10 - 12 LINES ................. 14 - TABLE OF DISKS AND SHIMS ............... 16 - PRODUCT COMPOSITION ................
  • Page 5 JM 2880 PD Pantographic Instructions Manual - DRIVE OF THE PLANTING UNITS ..............46 8.10 - FERTILIZER DISTRIBUTION ................46 8.10.1 - CALCULATION TO DETERMINE FERTILIZER DISTRIBUTION QTY ... 46 8.10.2 - FERTILIZER DISTRIBUTION TABLE .............. 48 8.11 - SEED DISTRIBUTION ..................56 8.11.1...

  • Page 6: Product Presentation

    In case of doubt, consult our technical services through telephone (16) 3660-1061, Fax (16) 3660-1116, or visit our website www.jumil.com.br JUMIL and its dealer will be at your disposal to assist you permanently with your MAGNUM. YOU are the reason for our search for continuous betterments.

  • Page 7: Safety Norms

    JM 2880 PD Pantographic Instructions Manual 2 - SAFETY NORMS JUMIL, by building its Agricultural Machinery and Equipment, has the main objective of assisting HUMANITY in developing a better QUALITY OF LIFE. However, in using these machines, there are two main precautions to...
  • Page 8 Machines that cover the rear signaling lights of the tractor should have their own alternative rear lights. ATTENTION When you receive your JUMIL Implement, carefully check for the components that accompany the machine and carefully read the warranty certificate on the first page of the instructions manual.

  • Page 9: Technical Specifications

    JM 2880 PD Pantographic Instructions Manual...
  • Page 10 JM 2880 PD Pantographic Instructions Manual...

  • Page 11: Work Power

    JM 2880 PD Pantographic Instructions Manual - Tractor Engine Power in HP (With Maximum Number of Lines) - Fertilizer Distributor: 2" Pitch Worm Thread (Standard), 1" Pitch Worm Thread (Optional) - Fertilizer Flow in the Range of 40 to 1400 Kg/ha - Tire 7.00-16 10 Linings...
  • Page 12 JM 2880 PD Pantographic Instructions Manual TRANSPORT DIMENSIONS 08, 10, 12, 15, 18, 21 Lines - 2500 mm 08 and 10 Lines - 2400 mm 12 and 15 Lines - 2600 mm 18 and 21 Lines - 2900 mm 08 Lines - 4800 mm...
  • Page 13 JM 2880 PD Pantographic Instructions Manual WORK DIMENSIONS 08 and 10 Lines - 4900 mm 10 and 15 Lines - 5100 mm 18 and 21 Lines - 5500 mm 08, 10, 12, 15, 18, 21 Lines - 2000 mm 08 Lines - 4000 mm...

  • Page 14: Optional 8 - 10 - 12 Lines

    JM 2880 PD Pantographic Instructions Manual 4 - OPTIONAL 8 - 10 - 12 LINES CODE DESCRIPTION 27.31.370 RIGHT 16” SHORT MG PANT SINGL UNIT 27.31.371 RIGHT 16” MIS DOUB DISK LONG MG PANT SINGL UNIT 27.31.495 LEFT 16” MIS DOUB DISK SHORT MG PANT SINGL UNIT 27.31.496...
  • Page 15 JM 2880 PD Pantographic Instructions Manual OPTIONAL 15 - 18 - 21 LINES CODE DESCRIPTION 27.31.370 RIGHT 16" MISM DOUBL DISK SHORT MG PANT SINGL UNIT 27.31.371 RIGHT 16" MIS DOUB DISK LONG MG PANT SINGL UNIT 27.31.495 LEFT 16" MISM DOUBL DISK SHORT MG PANT SINGL UNIT 27.31.496...

  • Page 16: Table Of Disks And Shims

    JM 2880 PD Pantographic Instructions Manual 4.1 - Table of Disks and Shims CODE CULTIVATION No. OF HOLES THICKNESS HOLES MATERIAL SHEAVE TYPE SHIM COTTON 27.10.159 COTTON 8,5 X 15,0 PLASTIC 27.10.219 H - Z 5 3 mm 27.10.057 COTTON 5,5 X 10,5 PLASTIC 27.10.249 D - Z 6 3 mm...

  • Page 17: Product Composition

    JM 2880 PD Pantographic Instructions Manual...

  • Page 18: Chassis

    JM 2880 PD Pantographic Instructions Manual 5.1 - Chassis Robust, sized to withstand the most demanding work conditions. Fig. 001 5.2 - Header With adjustments at various points for easy coupling to the tractor and implement stability. Fig. 002 5.3 - Wheels...

  • Page 19: Line Markers

    JM 2880 PD Pantographic Instructions Manual 5.4 - Line Markers With Hydraulic actuation and 18' cutout disk, which considerably marks the soil, allowing for constant uniform spacing in-between lines. 5.5 - Platforms With articulated ladder (Fig. 5) for access onto the platform, which...

  • Page 20: Fertilizer Covering Kit

    JUMIL provides several optional coverer kits for use in its line of planters, to adopt them, the following rules must be observed, according to...
  • Page 21 JM 2880 PD Pantographic Instructions Manual Double Disk Fertilizer "V" adjustable coverer kit, 27.32.908 Use a minimum spacing of 550 mm, being that, in the line of the wheel, on the opposite side of the chain, the fertilizer unit must be misaligned 25 mm from the seed line.
  • Page 22 JM 2880 PD Pantographic Instructions Manual Furrower Fertilizer "V" adjustable coverer kit, 27.32.915 Use a minimum spacing of 400 mm and minimum of 450 in the line of the wheel, being that, on the opposite side of the chain, the fertilizer unit must be misaligned 25 mm from the seed line.

  • Page 23: Concave Compacter For Cotton Plantation

    JM 2880 PD Pantographic Instructions Manual 5.7 - Concave Compacter for Cotton Plantation Efficiently substitutes the double tread compacters in cotton plantation, due to the fact that the concave tread covers the seed without pressing the earth over it. Fig.012 5.8 - Concave Compacter Kit...

  • Page 24: Sweeping Kit (Optional)

    JM 2880 PD Pantographic Instructions Manual 5.10 - Hydraulic Cylinder Stroke Adjustment Shim. The adjustment shim ("a" Fig. 15) is usually employed in light terrain to relieve the machine load on the cutting, fertilizing and seeding units. 5.11 - Sweeping Kit (Optional) Optionally, the sweeping kit (Fig.

  • Page 25: Accompanying Components

    JM 2880 PD Pantographic Instructions Manual 6 - ACCOMPANYING COMPONENTS ATTENTION The machine comes semi-assembled from factory. Check the components that come with the machine and carefully follow the assembly and adjustment instructions before performing any operation. 8 - 10 - 12 lineas...
  • Page 26 JM 2880 PD Pantographic Instructions Manual 15 - 18 - 21 linhes DESCRIPTION CODE PACK PARTS SET FOR DISPATCH 15L 27.31.128 PACK PARTS SET FOR DISPATCH 18L 27.30.971 PACK PARTS SET FOR DISPATCH 21L 27.32.160 D13.5 DI43.0LO230 COMPRESSION SPRING 27.18.272 “V”...

  • Page 27: Product Assembly

    JM 2880 PD Pantographic Instructions Manual 7 - PRODUCT ASSEMBLY 7.1 - Putting the header in working position To put the header in working position, just loosen the lock pin ("a" Fig. 18), put it in the position ("b" Fig.
  • Page 28 JM 2880 PD Pantographic Instructions Manual c) Mount the protective hoods ("b" Fig. 21) in the gearboxes, fixing with the braces ("c" Fig. 21) to later mount the transmission shaft ("d" Fig. 21). Fig. 020 ATTENTION Before installing the transmission shaft "d", lubricate the inner part of hood "b"...

  • Page 29: Compacter Wheels

    JM 2880 PD Pantographic Instructions Manual 7.3 - Compacter Wheels. Position the compacter assembly and couple it with the pin ("a"), tighten the nut ("b" Fig. 22), ensuring that compacter assembly can articulate freely, then lock the fastening with the check nut ("c" Fig. 22). To place the vertical spring ("d"...
  • Page 30 JM 2880 PD Pantographic Instructions Manual Fig. 023 Fig. 024...

  • Page 31: 20" Cutting Disk Kit (Optional)

    JM 2880 PD Pantographic Instructions Manual 7.5 - 20" Cutting disk kit (optional). Installing of the cutting disk kit (Fig. 25) is done in the space of the fertilizer arm claw, and the cutting kit disk can be installed in line or misaligned with the fertilizer element (double disk or furrower).

  • Page 32: Furrower

    JM 2880 PD Pantographic Instructions Manual 7.6.2 - Furrower The fertilizer coverer kit for furrower must be fastened to the furrower support as shown in Fig. 27, the rod of the spring being installed later in the coverer support. In...

  • Page 33: Installing The Tightening Wheel

    JM 2880 PD Pantographic Instructions Manual W hen the long unit is changed to short, you must use the support of rod "a", which already comes with the machine (Fig. 29). Fig. 029 7.8 - Installing the Tightening Wheel Remove the protector and f asten the tightening wheel assembly using the bolts "a"...

  • Page 34: Preparation For Use

    JM 2880 PD Pantographic Instructions Manual 8 - PREPARATION FOR USE Your planter allows various adjustments to enable uniform distribution of both seed and fertilizer. Read this manual attentively and follow the instructions. In case of doubt, consult our technical services through telephone (16) 3660-1061, fax (16) 3660-1116, or visit our website at www.jumil.com.br.

  • Page 35: Direct Or Conventional Planting

    JM 2880 PD Pantographic Instructions Manual 8.2 - Direct or conventional planting Your planter makes direct or conventional planting, whereas direct planting uses the 17" or 18" (optional) cutting disk assembly ("a" Fig. 33) or the PD Kit of 20" (optional). The 18" cutting disk being used only for assembly with the furrower, and for conventional planting, the cutting disk must be removed.

  • Page 36: Direct Planting Cutting Disk

    JM 2880 PD Pantographic Instructions Manual 8.3 - Direct planting cutting disk Your implement has a smooth or grooved cutting disk system for direct planting (according to land conditions or farmer option). The smooth cutting disk has greater cutting height and easy penetration, but in certain terrains and situations, it can cause a "mirroring"...

  • Page 37: Retractable Deep Furrower

    JM 2880 PD Pantographic Instructions Manual Fig. 034 8.4.2 - Retractable deep furrower The deep fertilizer furrower assembly ("b" Fig. 34) has fused bolt system ("c" Fig. 34), which allow disarm of the furrower boot on coming across any obstacle in the planting line. The fertilizer is conducted to the desired depth by the setting allowed by the fertilizer conductor, which is set by the bolt.

  • Page 38: Seed Distribution Depth Regulation

    JM 2880 PD Pantographic Instructions Manual The fertilizer depth is adjusted through the bushings with bolts as follows: a)- Changing the upper bushing upwards increases the depth of the fertilizer and downwards reduces it. b)- Keep the spring pressure by adjusting...

  • Page 39: Seed Depth Control

    JM 2880 PD Pantographic Instructions Manual 8.6.2 - Seed Depth Control The seed depth control system can be done individually through the independent self-cleaning depth control treads. The depth is adjusted using the crank ("a" Fig. 37), which moves the articulated top ("b" Fig. 37) in...

  • Page 40: Positioning Of The Depth Controller Wheels

    JM 2880 PD Pantographic Instructions Manual 8.6.3 - Positioning of the depth controller wheels Considering that the depth controller wheels are of utmost importance for planting success, your JM 2880 Pantográfica, has three adjustment resources, namely: a) Positioning of the wheel arm assembly in three positions, through rearrangement of the spacer bushing ("a"...
  • Page 41 JM 2880 PD Pantographic Instructions Manual b) Adjustment of the controller wheel axle. The adjustment of the controller wheel axle is exclusive for position 1, because when the wheels are used in this position, there may be the need to adhere the lip of the wheel to the disk or slightly withdraw the lip from the wheel in relation to the disk surface.

  • Page 42: Compacting And Covering Of Seeds

    JM 2880 PD Pantographic Instructions Manual 8.6.4 - Compacting and Covering of Seeds The adjustment of the compacter wheels is also a fundamental factor for good planting. Your JM 2880 Pantográfica has three adjustment features, namely: a) Vertical spring. As shown in figure 41, vertical spring "a"...

  • Page 43: Ratchet Adjustment

    JM 2880 PD Pantographic Instructions Manual 8.7 - Ratchet Adjustment The ratchets automatically activate and deactivate seed and fertilizer flow. If manually activated through the lever, allow sowing with only half of the lines for final touches. Fig. 044 Fig. 043...

  • Page 44: Gear

    JM 2880 PD Pantographic Instructions Manual 8.8 - Gear The JM 2880 PD Pantográfica, Planter has a revolutionary INBUILT GEAR system, for activation of the seed and fertilizer distributor systems, guaranteeing fast and efficient adjustments. The transmission of the seed and fertilizer distributor system is similar,...

  • Page 45: Chain Tension Adjustment

    JM 2880 PD Pantographic Instructions Manual The stretcher of the gear chains has self-adjusting torsion spring to take all possible adjustments. The stretcher fastening support of the chains has an eccentric system to adjust the spring pressure, by simply loosening the nut and moving the stretcher support in vertical position.

  • Page 46: Drive Of The Planting Units

    JM 2880 PD Pantographic Instructions Manual 8.9 - Drive of the planting units The planting units are driven by the axle ("a" Fig. 47) and gearboxes "b" interconnected by the cardan shaft "c", which drives the seed distributor by means of a chain.
  • Page 47 JM 2880 PD Pantographic Instructions Manual For easier adjustment of your planter, we present below a very simple way of determining the fertilizer quantity. For this, just use the formula below, entering the actual values from your farm. B x C Fórmula:...

  • Page 48: Fertilizer Distribution Table

    JM 2880 PD Pantographic Instructions Manual 8.10.2 - Fertilizer Distribution Table Pitch 25 mm LOW REVOLUTION CHART (RATCHET SHAFT 17 X 33 FERTILIZER SHAFT) KILOGRAMS PER HECTARE TRANSMISSION RATE ROW SPACING IN CENTIMETERS DRIVE DRIVEN 42,5 47,5...
  • Page 49 JM 2880 PD Pantographic Instructions Manual Pitch 25 mm LOW REVOLUTION CHART (RATCHET SHAFT 17 X 33 FERTILIZER SHAFT) KILOGRAMS PER HECTARE TRANSMISSION RATE ROW SPACING IN CENTIMETERS DRIVE DRIVEN...
  • Page 50 JM 2880 PD Pantographic Instructions Manual Pitch 25 mm HIGH REVOLUTION CHART (RATCHET SHAFT 33 X 17 FERTILIZER SHAFT) KILOGRAMS PER HECTARE TRANSMISSION RATE ROW SPACING IN CENTIMETERS DRIVE DRIVEN 42,5 47,5 1006 1027 1049 1080 1141 1183 1255 1312...
  • Page 51 JM 2880 PD Pantographic Instructions Manual Pitch 25 mm HIGH REVOLUTION CHART (RATCHET SHAFT 33 X 17 FERTILIZER SHAFT) KILOGRAMS PER HECTARE TRANSMISSION RATE ROW SPACING IN CENTIMETERS DRIVE DRIVEN 1006 1027 1049 1080 1141 1183 1255 1312 1389 1443...
  • Page 52 JM 2880 PD Pantographic Instructions Manual Pitch 48 mm LOW REVOLUTION CHART (RATCHET SHAFT 17 X 33 FERTILIZER SHAFT) KILOGRAMS PER HECTARE TRANSMISSION RATE ROW SPACING IN CENTIMETERS DRIVE DRIVEN 42,5 47,5...
  • Page 53 JM 2880 PD Pantographic Instructions Manual Pitch 48 mm LOW REVOLUTION CHART (RATCHET SHAFT 17 X 33 FERTILIZER SHAFT) KILOGRAMS PER HECTARE TRANSMISSION RATE ROW SPACING IN CENTIMETERS DRIVE DRIVEN...
  • Page 54 JM 2880 PD Pantographic Instructions Manual Pitch 48 mm HIGH REVOLUTION CHART (RATCHET SHAFT 33 X 17 FERTILIZER SHAFT) KILOGRAMS PER HECTARE TRANSMISSION RATE ROW SPACING IN CENTIMETERS DRIVE DRIVEN 42,5 47,5 1043 1074 1117 1147 1152 1217 1235 1251...
  • Page 55 JM 2880 PD Pantographic Instructions Manual Pitch 48 mm HIGH REVOLUTION CHART (RATCHET SHAFT 33 X 17 FERTILIZER SHAFT) KILOGRAMS PER HECTARE TRANSMISSION RATE ROW SPACING IN CENTIMETERS DRIVE DRIVEN 1043 1074 1117 1147 1152 1217 1235 1251 1262 1352...
  • Page 56 JM 2880 PD Pantographic Instructions Manual...
  • Page 57 JM 2880 PD Pantographic Instructions Manual...

  • Page 58: Seed Distribution

    JM 2880 PD Pantographic Instructions Manual 8.11.1 - Change of disks for seed To mount or change the disk, loosen the butterfly, release the lock, and then tilt the tank, remove the disk and in place the desired disk in the same position, observing the engraving stating "THIS SIDE DOWN".
  • Page 59 JM 2880 PD Pantographic Instructions Manual Due to the great variety of disks with several holes for each seed type and size, the use of specific sheaves are required. Below there is a list of the existing models, to be used according to the table of disks.
  • Page 60 JM 2880 PD Pantographic Instructions Manual Fig. 050 IMPORTANT To improve seed flow in the tank and distribution system, we recommend using graphite powder in the seed mixture. This measure will reasonably prevent obstructions and wearing out of components. ATTENTION...

  • Page 61: Deflector For Conventional Grains

    JM 2880 PD Pantographic Instructions Manual 8.11.3 - Deflector for conventional grains The deflector is a component used inside the seed tank to prevent the seed pressure on the distributor box limiter, except in case of rice planting. This system provides a more uniform distribution, preventing damages to the seed.
  • Page 62 JM 2880 PD Pantographic Instructions Manual ATTENTION There is a smooth disk (27.28.701) that comes with the single unit, which may be bored by the customer according to its needs, except in the case of rice planting. After placing the bored disks and...

  • Page 63: Blind Disk Boring (Thermoplastic)

    JM 2880 PD Pantographic Instructions Manual 8.11.5 - Blind Disk Boring (thermoplastic) The blind disk (27.28.701) (Fig. 52) that comes with the machine can be bored by the farmer, just needing to define the diameter and quantity of holes. For boring, we recommend...

  • Page 64: Line Markers

    JM 2880 PD Pantographic Instructions Manual 8.12 - Line Markers Two types of line markers are supplied, one in the mechanical system and another in the hydraulic system (optional). 8.12.1 - Line Marker Adjustment The use of line markers is important to obtain perfect seeding as it...
  • Page 65 JM 2880 PD Pantographic Instructions Manual Line Marker Calculation The full length of the line marker arm must be calculated by the formula: D = e (n + 1) - b For marking by the tire closest to the seeding line...

  • Page 66: Changing Spacing

    JM 2880 PD Pantographic Instructions Manual 8.13 - Changing Spacing To change spacing, proceed as follows. a) First of all, lift the planter using the hydraulic cylinder control, next, lock the cylinder using the lock Fig. 55 b)- Mark the machine center on the chassis;...
  • Page 67 JM 2880 PD Pantographic Instructions Manual SPACING JM 2880PD PANTOGRÁFICA...
  • Page 68 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 08 Lines with 4 Lines of 760 mm...
  • Page 69 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 70 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 10 Lines with 9 Lines of 450 mm...
  • Page 71 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION LEFT RIGHT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 72 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 12 Lines with 10 Lines of 500 mm...
  • Page 73 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 74 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 12 Lines with 10 Lines of 525 mm...
  • Page 75 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 76 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 12 Lines with 11 Lines of 450 mm...
  • Page 77 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION LEFT RIGHT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 78 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 15 Lines with 13 Lines of 500 mm DESVIO DESVIO...
  • Page 79 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION LEFT RIGHT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 80 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 18 Lines with 15 Lines of 475 mm...
  • Page 81 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 82 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 18 Lines with 17 Lines of 400 mm...
  • Page 83 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 84 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 18 Lines with 17 Lines of 450 mm...
  • Page 85 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 86 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 18 Lines with 16 Lines of 450 mm...
  • Page 87 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 88 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 18 Lines with 15 Lines of 500 mm...
  • Page 89 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...
  • Page 90 JM 2880 PD Pantographic Instructions Manual Chassis Machine of 21 Lines with 21 Lines of 400 mm...
  • Page 91 JM 2880 PD Pantographic Instructions Manual DETAIL FOR MOUNTING THE FERTILIZER ARMS, SEEDER UNITS AND EXTENDERS WITH DEVIATION RIGHT LEFT 27.32.270 27.32.276 27.31.475 27.31.474 THE ASSEMBLIES ABOVE MUST BE INSTALLED IN THE INTERFERENCES WITH THE INTERMEDIARIES LEGEND SINGLE DESCRIPTION DEVIATION...

  • Page 92: Operation

    JM 2880 PD Pantographic Instructions Manual 9 - OPERATION 9.1 - Preparing the tractor Conduct a general revision of the tractor in order to plant without interruptions caused by tractor damage. Remember that your planting period is short and depends on weather conditions that are beyond your control.
  • Page 93 JM 2880 PD Pantographic Instructions Manual After coupling, put it in transport position, i.e., with the implement in its highest position (fully lifted by the hydraulic system) and weigh the front wheels again. Install the necessary weights to obtain at least over half of the...

  • Page 94: Maintenance

    JM 2880 PD Pantographic Instructions Manual 10 - MAINTENANCE In this section, we suggest some maintenance precautions that should be obeyed in order to obtain longer equipment service life and best performance. Periodically subject the machine to general repair. The items described below are of extreme importance for the perfect running of the machine and uninterrupted work.

  • Page 95: Line Markers Drive Ratchet

    JM 2880 PD Pantographic Instructions Manual Excess Pressure Little Pressure Correct Pressure Fig. 056 10.3 - Line Markers Drive Ratchet If there is an irregular functioning of the mechanical line markers after a period of use, check the tension of the chains and, if any of the chains has...

  • Page 96: Chain Tension

    JM 2880 PD Pantographic Instructions Manual 10.4 - Chain tension In case the chains stay according to "B" Figure 58, it will be necessary to stretch them and to do so, just loosen the stretcher bolts and position them such that the chain stays slightly stretched according to Figure "A".
  • Page 97 JM 2880 PD Pantographic Instructions Manual Where to check chain tension...

  • Page 98: Hydraulic Cylinder

    JM 2880 PD Pantographic Instructions Manual 10.5 - Hydraulic Cylinder Repair kit code 27.30.330 for machines model 8 /10 /12/18 /21 4.1/2" cylinder lines Repair kit code 27.30.331 for machines model 15 cylinder lines 5" - Cylinder Rod - Scraper...

  • Page 99: Installing The Gasket In The Rod Guide

    JM 2880 PD Pantographic Instructions Manual 10.5.3 - Installing the Gasket in the Rod Guide a) To install the gasket, use the special pliers, lubricating its tips for easy extraction. Put the gasket with its lips facing downward over the table...

  • Page 100: Maintenance Checklist

    JM 2880 PD Pantographic Instructions Manual 10.6 - Maintenance Checklist Periodically review your equipment as it is of utmost importance for the perfect functioning of the equipment and a job without interruptions. In the items below, we suggest the points to be reviewed.

  • Page 101: Incidents And Troubleshooting

    JM 2880 PD Pantographic Instructions Manual 10.7 - Incidents and troubleshooting ATTENTION Before requesting for technical services, check the following items: Not distributing seeds or fertilizer Possible Causes Solutions 1 - Tanks Empty; 1 - Fill the tanks; 2 - Obstructed Outlets;...
  • Page 102 JM 2880 PD Pantographic Instructions Manual Seed falling outside the furrow Possible Causes Solutions 1 - Planting speed high; 1 - Set to 5 km/ hr; 2 - Double disks worn out; 2 - Change and align; 3 - Double disks outside the furrow.

  • Page 103: Lubrication

    Remember that your JUMIL implement does not require lubrication of the cutting disk bearings, fertilizer and seeder double disks, depth controller and compacter wheels, articulations of the pantographic fertilizer and seeder units.

  • Page 104: Lubrication Table

    JM 2880 PD Pantographic Instructions Manual...

  • Page 105: Lubrication Points

    JM 2880 PD Pantographic Instructions Manual 10.8.4 - Lubrication Points 1 - Basic Unit...
  • Page 106 JM 2880 PD Pantographic Instructions Manual 2 - Basic Unit...
  • Page 107 JM 2880 PD Pantographic Instructions Manual...
  • Page 108 JM 2880 PD Pantographic Instructions Manual NOTES...

Table of Contents