Electrical Information - CDA akd01 Manual For Installation, Use And Maintenance

located in the base of the waste disposer body.
• The mounting bracket (D) is supplied as an alternative mounting for
if you choose to mount the air switch button under the sink out of
sight.

Electrical Information

Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A 3 Amp
fused plug. To change a fuse in this type of plug, follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 3A fuse, ASTA approved to BS 1362 type, into the
fuse cover.
3. Replace fuse cover.
Important: Do not use the appliance without the fuse cover in
position.
13