Air Switch Installation - CDA akd01 Manual For Installation, Use And Maintenance

Air switch installation

Identify and check all necessary parts, as Fig. 7.
• The air switch needs to be fitted into a 35mm diameter hole within
easy reach of the user. We suggest you either use a redundant
tap mounting hole (if you have one) in your sink or drill one in the
worktop.
• Unscrew the back-nut from the push button bellows (C) and pass
the threaded part of the belows through the 35mm hole as above.
Fit and tighten the back-nut to lock the bellows in place.
• Attach one end of the PVC air tube (B) to the bellows (C), trim it to
length and mount the other end over the spout of the air switch,
12
A Air switch
B PVC air tube (1m supplied)
C Push button bellows
D Mounting bracket
Fig. 7