Care & Cleaning - Toto CT705UN Installation And Owner's Manual

5. Install the mounting hardware (see
Illustration 4)
• Place the bases on the T-bolts,
making sure that the marking
"This Side Up" on the bases
faces upwards.
• Mount the mounting washers and
nuts on the bases and T-bolts.
Tighten the nuts
with care.
• If the T-bolts are longer than 1/4"
(6mm) for the upper part of the
nuts, cut the excess with
a hacksaw.
• Install the bolt caps.
6. Install the flush valve according to the manufacturer's instructions.
7. Turn on the water supply for the flush valve.
8. Install the toilet seat according to the manufacturer's instructions.
9. Flush the toilet a few times to make sure there are no leaks at any of the
connections.
10. Check periodically that there are no leaks during the days after the
installation.
WARNING! DO NOT USE IN-TANK BOWL CLEANERS.
The use of high concentration of chlorine or chlorine-related products can
seriously damage fittings in the tank. This damage can cause leakage and
property damage.TOTO shall not be responsible or liable for any tank
fitting failure or damage caused by the use of in-tank bowl cleaners.
INSTALLATION PROCEDURE
CARE & CLEANING
4
ill. 4
Bolt cap
Base cap
T- bolt
CAUTION: Do not over
tighten the nuts, or the china
may break or rupture.
Nut
Washer