Shimano GRX RX 815 Series Dealer's Manual page 83

INSTALLATION/REMOVAL
Installing the battery
` Installation of the bottle cage adapter
If the bottle cage or bottle which is installed to the seat tube interferes with the external
battery, move the position of the bottle cage upwards within a range of 32 mm - 50 mm using
the bottle cage adapter.
1.
Install the bottle cage adapter.
(1) Use the longer mounting bolt to install the bottle cage adapter.
* If it interferes with the mounting boss for the front derailleur, use the included
spacer.
(2) Use the short mounting bolt to install the bottle cage.
* Refer to the owner's manual for the bottle cage for details on the tightening
torques.
(1)
Spacer
NOTICE
• When installing parts on a carbon frame/handlebars, confirm the recommended
tightening torque with the carbon frame or part manufacturer in order to
prevent damage to the carbon material due to overtightening or inadequate
securing of the components due to insufficient tightening torque.
Long (15 mm)
Mounting bolt
3 N·m
Long (15 mm)
(2)
Short (10 mm)
83
Mounting
bolt
Short (10 mm)