Motorola APX 6000XE 2.5 Manual page 67

ADVANCED FEATURES
Searching and Pairing a Bluetooth Device
Bluetooth Search in Bluetooth Standard Pairing method is
used to scan for other Bluetooth devices nearby. It is set to
Off by default.
Note: Ensure the Bluetooth on your device is turned to On
and is set to DISCOVERABLE in order to enable your radio
to detect your device in Bluetooth.
Procedure:
1. or to BT.
2. Press the Menu Select button directly below BT to
access the Bluetooth feature screen.
3. or to Search Devices.
4. Press the Menu Select button directly below On.
The display changes to BT Searching screen and it shows
Searching for BT devices.
OR
You hear the radio sounds a short, low-pitched tone.
The Bluetooth feature screen shows BT Search failed.
The BT Searching screen shows the name of Bluetooth
devices found if there are any.
OR
To stop the searching press the Menu Select button
below Stop.
When the search timer expires, Available Dev screen is
shown.
The display shows a list of Bluetooth devices found.
5. If the list shows the required device,
or to the device name and press the Menu Select
button directly below Sel to connect to the device.
The radio starts pairing to the device.
OR
Press the Menu Select button below Back to return to
Bluetooth feature screen.
OR
Press or the Menu Select button below Exit to return
to home screen.
NOTE: Some bluetooth devices will have different pairing
instructions. Please refer to your bluetooth accessory
documentation for specific instructions and
troubleshooting.
67