Taking Out Of Operation Safely - Spartherm ebios-fire architecture SL Installation And Operating Instructions Manual

3. The burner remains in the housing when being refilled. For this remove
the protective panes and then open the housing cover.
4. Check the tank content.
5. Make sure that the cover plate is placed on the burner and covers the
burner mat.
6. Use a key to open the filling screw.
7. Insert the funnel into the filling opening and pour in a maximum of 2.6
l of bioethanol.
8. The fill level indicator shows the maximum permitted fill level.
The maximum fill level is reached when the bioethanol runs out of the
slit (see arrow) into the reflector curve.
Should you ever pour in too much fuel and cause the burner to overflow,
the ethanol collects in the safety container. Empty this immediately and
before lighting the burner. Clean the surface of the burner until it is dry and
completely free of ethanol.
To ignite the burner follow the steps 9-16 described in point 3.4.1!

3.6 TAKING OUT OF OPERATION SAFELY

If you wish to take the burner out of operation prematurely, place the cover
on the burner with the aid of the grip stick. Insert the grip stick to grip the
cover plate and then cover this over the burner channel.
GB 14