Configuring Rmon; Configuration Prerequisites; Configuration Procedure - H3C S9500 Series Operation Manual

Routing switches

Hide thumbs Also See for S9500 Series:

Table of Contents

Operation Manual – RMON

H3C S9500 Series Routing Switches

System handles the prialarm alarm table entry (as defined by the user) in the following

ways:

Periodically samples the prialarm alarm variables defined in the prialarm formula.

Calculates the sampled values based on the prialarm formula.

Compares the result with the defined threshold and generates an appropriate

event.

IV. History group

The history group controls the periodic statistical sampling of data, such as bandwidth

utilization, number of errors, and total number of packets.

Note that each value provided by the group is a cumulative sum during a sampling

period.

V. Ethernet statistics group

The statistics group monitors port utilization. It provides statistics about network

collisions, CRC alignment errors, undersize/oversize packets, broadcasts, multicasts,

bytes received, packets received, and so on.

After the creation of a valid event entry on a specified interface, the Ethernet statistics

group counts the number of packets received on the current interface. The result of the

statistics is a cumulative sum.

Note:

Currently, S9500 series switches do not support statistics about oversize frames and

bytes received.

1.2 Configuring RMON

Before configuring RMON, configure the SNMP agent as described in SNMP

Configuration in the System Volume.

Follow these steps to configure RMON:

1-3

Chapter 1 RMON Configuration

Table of Contents