About This Manual - Sony HT-SL500 Operating Instructions Manual

About This Manual

• The instructions in this manual are for model
HT-SL800, HT-SL700, HT-SL600 and HT-SL500.
Check your model number by looking at the lower
right corner of the front panel. In this manual,
HT-SL500 models of area code CEL is used for
illustration purposes unless stated otherwise.
• The instructions in this manual describe the controls
on the remote. You can also use the controls on the
receiver if they have the same or similar names as
those on the remote. For details on the use of your
remote, see pages 31–34.
The HT-SL800 consists of:
• Receiver
• Speaker system
– Front speakers
– Center speaker
– Surround speakers
– Sub woofer
The HT-SL700 consists of:
• Receiver
• Speaker system
– Front speakers
– Center speaker
– Surround speakers
– Sub woofer
The HT-SL600 consists of:
• Receiver
• Speaker system
– Front/Surround speakers
– Center speaker
– Sub woofer
The HT-SL500 consists of:
• Receiver
• Speaker system
– Front/Surround speakers
– Center speaker
– Sub woofer
STR-KSL600
This receiver incorporates Dolby* Digital and Pro
SS-SLP701
Logic Surround and the DTS** Digital Surround
SS-CNP501
System.
SS-MSP501
* Manufactured under license from Dolby
SA-WMSP601
STR-KSL700
** "DTS" and "DTS Digital Surround" are registered
SS-SLP701
SS-CNP501
SS-MSP501
Note for the supplied remote
SA-WMSP501
For RM-U700
The AUX button on the remote is not available
STR-KSL600
for receiver operation.
SS-MSP501
SS-CNP501
SA-WMSP601
STR-KSL500
SS-MSP501
SS-CNP501
SA-WMSP501
About area codes
The area code of the receiver you purchased is
shown on the lower portion of the rear panel (see
the illustration below).
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
"Models of area code AA only".
Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
trademarks of Digital Theater Systems, Inc.
4-XXX-XXX-XX AA
Area code
GB
3