5: Preparing The Receiver And The Remote - Sony HT-DDW890 Operating Instructions Manual

5: Preparing the receiver
and the remote
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
SURROUND BACK
L
R
SURROUND CENTER
To the wall outlet
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1,2
?/1
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/ TUNING
ENTER MODE TUNING
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R
3
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
"PUSH" and "ENTER" appears on the
display alternately.
3
Press MEMORY/ENTER.
After "CLEARING" appears on the
display for a while, "CLEARED"
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO, VIDEO and
SYSTEM menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME is set to "VOL
MIN".
• Input is set to "DVD".
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
2CH A.F.D. MOVIE MUSIC AUTO CAL MUTING
29 GB