Table of Contents
Advertisement
About This Manual
• The instructions in this manual are for model
HT-DDW890. In this manual, models of area code
CEL is used for illustration purposes unless stated
otherwise. Any difference in operation is clearly
indicated in the text, for example, "Models of area
code CEL only".
The HT-DDW890 consists of:
• Receiver
• Speaker system
– Front speakers
– Center speaker
– Surround/surround back speakers SS-SRP890
– Sub woofer
• The instructions in this manual describe the
controls on the supplied remote. You can also use
the controls on the receiver if they have the same
or similar names as those on the remote.
About area codes
The area code of the receiver you purchased is
shown on the lower right portion of the rear panel
(see the illustration below).
SURROUND BACK
L
R
SURROUND
CENTER
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
"Models of area code AA only".
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic", "Surround EX", and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS-ES Neo:6" are registered
trademarks of DTS, Inc. "96/24" is a trademark
of DTS, Inc.
This receiver incorporates High-Definition
Multimedia Interface (HDMI
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
Note for the supplied remote
(RM-AAP017)
The AUX button on the remote is not available
STR-K890
for receiver operation.
SS-MSP890
SS-CNP890
SA-WP890
Area code
) technology.
TM
3
GB
Advertisement
Table of Contents
