Table of Contents
Advertisement
1.
Start by checking if the SIM is already activated.
2.
In the MAC or AID field, enter the number. (Choose MAC for a SIM; or choose AID for the VISTA-GSM module used
with the VISTA-21iP control panel.) Then click Get Status.
NOTE: The SIMs used in the Canadian modules are all pre-activated.
3.
If the SIM is already activated, its Current State will show it as SIM is activated (in green).
4.
If the SIM is not activated, under Provision SIM, enter the CRC (or AID), and notification email so AlarmNet can notify
you when the SIM is activated. Then click Activate, a confirmation screen appears.
5.
When you receive notice the SIM is activated, you will be asked to complete the process by:
To complete the activation process for mac number (00D02Dxxxxxx) please do the
following:
1) Power-Cycle the device by removing the input power and battery.
2) Apply input power and plug in the battery.
To program and register the radio logon to https://www.alarmnet360.com, or use a
7720p programmer, or call AlarmNet Technical Support at 800-222-6525:
Select 'Technical Support'(Option #1) followed by 'Alarmnet GSM Device
Activation/Registration'(Option #1) or for Lynx Touch, use the touch screen 'program
radio' screen.
Monday-Friday 8:00amET to 10:00pmET, and Saturdays 9:00amET – 5:30pmET.
If device is already programmed, registration can be completed as follows:
* Triple clicking the tamper switch on the device.
* Using a 7720P programmer, press the SHIFT key then the UP ARROW key.
* For Lynx Touch, use the touch screen registration command.
AlarmNet360 Online Help Guide
– 9 –
Tasks
Contents
Hide quick links:
Advertisement
Table of Contents
