Naming Inputs - Sony HT-7100DH Operating Instructions Manual

Assignable inputs for digital
audio input
The initial setting is marked with underscore.
Digital Assignable
audio inputs
input
VIDEO 2 VIDEO 1
OPT
VIDEO 2
VIDEO 3
DVD
TV
SA-CD/CD
DVD VIDEO 1
COAX
VIDEO 2
VIDEO 3
DVD
SAT
TV
SA-CD/CD
SAT OPT VIDEO 1
VIDEO 3
DVD
SAT
TV
SA-CD/CD
Notes
• You cannot reassign more than one digital audio
inputs to the same input.
• You cannot use the digital audio input for the original
input when it has been assigned to another input.
• When you reassign the digital audio input, the INPUT
MODE setting may change automatically (page 63).
• You cannot reassign the digital audio input to
TUNER, XM Radio and DMPORT.
Display
VD2–VD1
VD2–VD2
VD2–VD3
VD2–DVD
VD2–TV
VD2–CD
DVD–VD1
DVD–VD2
DVD–VD3
DVD–DVD
DVD–SAT
DVD–TV
DVD–CD
SAT–VD1
SAT –VD3
SAT –DVD
SAT–SAT
SAT–TV
SAT–CD

Naming inputs

You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
3
Press MENU.
"1-LEVEL" appears on the display.
4
Press V/v repeatedly to select
either "5-AUDIO" or "6-VIDEO".
5
Press or b to enter the
menu.
6
Press V/v to select "NAME IN".
7
Press or b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name" (page 56).
67 US