8: Adjusting The Speaker Levels And Balance (Test Tone) - Sony HT-7100DH Operating Instructions Manual

8: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
AUX
DMPORT
2CH A.F.D.
CATEGORY
SLEEP MODE
1
4
7
-/--
CLEAR
>
10
GUIDE
3-6
G
O
RETURN/ /
EXIT
–
CATEGORY
REPLAY
.
–
TUNING
m
DISC SKIP
TV VOL
MASTER VOL
MASTER
VOL +/–
MUTING
1
Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2
Press MENU.
"1-LEVEL" appears on the display.
1
RECEIVER
MOVIE MUSIC
D.TUNING AUTO CAL
2 3
6
5
8
9
0/ / 10
ENTER
MEMORY
DISPLAY
F
g
f
2
OPTIONS
MENU TOOLS
+
ADVANCE
>
+
TUNING
M
TV CH
PRESET
3
Press or b to enter the
menu.
4
Press V/v repeatedly to select
"T. TONE".
5
Press or b to enter the
parameter.
6
Press V/v repeatedly to select
"T. TONE Y".
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround left t
Sub woofer
7
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see "Adjusting the level
(LEVEL menu)" (page 41).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
8
Repeat steps 1 to 6 to select
"T. TONE N".
You can also press any input buttons.
The test tone turns off.
33 US